Our ‘Slip Bricks’ are designed to provide a suitable support for the concrete infill block to the edges of the floor block (usually around the periphery of the floor).
The 20N/mm² ‘Slip Brick will provide support to the final block, thus allowing the continuation of the inner skin build. Two ‘Slip Bricks’ are required between each beam when units are placed with the block at its 440mm section, whilst one ‘Slip Brick’ is required when the units are placed with the block at its 215mm section.
‘Slip Bricks’ must be bedded in between beam ends in order to ensure stable support.
When designed in conjunction with our floor beams, we will offer a full design and guarantee service on the product as well as stipulating and supplying the quantity required. Alternately we can supply the ‘Slip Bricks’ to suit our 150mm beam in packs of 136, 204 or 408; whilst the ‘Slip Bricks’ to suit our 225mm beam can be supplied in packs of 360.
On builds that have a 140mm inner skin, Litecast will supply double the amount of 100mm slips.
Our reference code for this product is detailed below:
150mm Slip Bricks – ANC-SB40
225mm Slip Bricks – ANC-SB100